TorcUP

TorcUP products are proudly made in the USA
TorcUP - VT-E6 Series

VT-E6 Series

VT-E6 Series Battery-Powered Torque Wrench

The Most Accurate Wheel Bolting Torque Wrench In The Industry

The VT-E6 Series Battery-Powered Torque Wrench is a torque tool specifically created for use on one of the most accuracy critical fastener applications in the world, Wheel Bolting! Now, this wrench, with its extended barrel and cordless versatility, is making one of the industry’s most difficult jobs easier than ever before. With the use of standard industrial sockets, every bolting application is met with a repeatable accuracy of +/-5%. Contact us for a Free Demo today!

Cutting-Edge Internal Brushless Technology

  • One Model Capable of 1,000 Ft/Lbs
  • Lithium Ion 8.0 Ah Rechargeable Battery
  • High Accuracy Brushless Motor
  • Every Unit Calibrated In ISO17025 Laboratory
  • Genuine TorcUP Design

The VT-E6 has been designed to lengthen the reach of the wrench’s barrel, allowing the user to safely and effectively torque fasteners that are located in width and depth critical locations – the most common application being the securing of lug nuts onto the wheels of large trucks and mining (OTR) equipment. However, the VT-E6 stands ready to take on ANY bolting application that requires up to 1,000 ft/lbs of torque. Whether you are bolting rims onto a large mining machine or you are assembling a large pump that has deep pocketed fasteners, there is no application VT-E6 can’t handle! Contact us for a Free Demo today!

MODEL NUMBER VT-1000E6
Square Drive 3/4"
Min torque (ft/lbs) 240
Max torque (ft/lbs) 1000
Min torque (nm) 335
Max torque (nm) 1355
Output Accuracy +/-5%
Repeatability 100%
Duty Cycle 100%
Weight w/o Arm & Battery 13.5lbs/ 6.1kg
Weight w/ Arm & Battery 16.5lbs/ 7.5kg
RPM @ Min. Torque 2
RPM @ Max. Torque 8
Requirements Charger Requirements: 110 - 120 V (50-60 Hz)
and 230 - 240 V (50-60 Hz)

MODEL NUMBER VT-1000E6
Height 10.40" / 264.2mm
Square Drive .75" / 19mm
Length 15.64" / 397.3mm
Diameter 1 2.62" / 66.5mm
Diameter 2 1.87" / 47.5mm

VT-E6 Dimensions Line Drawing

Nose Extension
Integral 6" Nose Extension
The nose of the tool has an integral 6" extension at the 3/4" square drive.

Ergonomic Pistol Grip
Ergonomic Slip-Resistant Pistol Grip
The pistol grip of the VT-E6 Series is engineered to allow for firm and comfortable positioning. The glass-filled nylon handle has a sturdy, slip-resistant overmold.

brushless motor
High-Efficiency Brushless Motor 
The high-efficiency brushless motor provides longer run-time and lower operational temperatures.

Cast Reaction Arm
Cast Reaction Arm
The sturdy "non-welded" construction provides a safe and strong reaction point.

Internal Gear Drive
Internal Gear Drive
The VT-E6 Series has a patented planetary gear design that provides consistent torque with no impacting.

Soft Start Trigger
Soft-Start Trigger
The soft-start trigger provides added safety to the operator, and the ergonomic selector allows forward and reverse operation without grip repositioning.

8.0 Lithium Ion Battery
18V 8.0 Ah LiHD Battery
The VT-E6 Series has an 18V 8.0 Ah LiHD rechargeable battery that provides extended run-time and the freedom of cordless operation.

18V 8.0 Ah Rechargeable Battery
8.0 Ah Rechargeable Battery
The VT-E6's 18V 8.0 Ah LiHD Battery provides cordless freedom and extended run-time.

Lithium Ion Battery Charger
Lithium Ion Volta Battery Charger
The VT-E6's premium, air-cooled lightning fast charger will have you ready to torque in under 60 minutes.

Long Extended Reaction Arm
Long Extended Reaction Arm
Used with deepwell sockets

Socket-to-Socket Reaction Arm
Socket to Socket Reaction Arm
Allows the operator to react against the adjacent nut using a cup to protect it. It allows to adjust the socket to socket between 4” and 6” away from the square drive of the tool

Straight Reaction Arm
Straight Reaction Arm
This arm is designed to accommodate a reaction point at a 90 degree angle from the drive.

Weld Bank Accessory
Weld Blank
This reaction arm is made of raw steel and allows the customer to fabricate their own custom arm. The weld blank is splined to fit the RP Series and includes heat treating specifications.